DS200ITXSG1A – REFURBISHED – GE SNUBBER CARD INVERTER EX2000

Description

SPECIFICATIONS

Manufacturer: General Electric 

MPN: DS200ITXSG1A

Series: Mark V

Title: DS200ITXSG1A GE SNUBBER CARD INVERTER EX2000

Product Description:

• DS200ITXSG1A is an Inverter Snubber Board Manufactured By General Electric to be used in Mark V Series.
• This Inverter Snubber Board is a part of the Excitation Controls EX200 system.
• DS200ITXSG1A is a Multi Pin Connector(8-Pin Connector & 2-Pin Connector)
• It contains four capacitors.
• Multiple test points available on this Board.
• Heat is produced by the GE Inverter Snubber Board DS200ITXSG1A, which, if allowed to accumulate, could cause sensors in the drive to emit an error condition in order to prevent the drive from overheating.
• If the drive is allowed to overheat, the electrical parts or the motor may be harmed. A safety risk that results in fire is another possibility.
• The drive will automatically cut off if the overheat condition arises, and you will need to take action to fix the problem.
• A trip condition is when the drive automatically turns off to prevent an overheat condition. An error message appears on the control panel display as a result of a trip condition.
• Installing the drive at a location that allows air to pass freely over and through it is the best method to avoid an overheat issue.
• Depending on the circumstances, you might need to provide chilled forced air to cool the drive’s components. Dust and harsh chemicals must also be absent from the air.
• The drive is made so that air may pass over the components to cool them as it flows from the bottom hole.
• Then, use the top opening to leave the drive. Route cables away from the drive’s bottom and top ports to assist the air flow by preventing obstructions.

The Phoenix Controls has the best prices on GE Mark V Unused & Refurbished DS200ITXSG1A Inverter Snubber Board. Check out our inventory of GE Speedtronic, GE Excitation, GE LCI, and Bently Nevada spare parts. Please call on +85259168256 or email [email protected] to get a quote.